The Raku Pottery


The raku pottery technique has it's origins in Japan. Raku potters were producing wares expressively for the Japanese tea ceremony. Raku, meaning "pleasure" or "enjoyment", was not introduced to the western world until the first half of the 20th century.

Karesansui - giardini roccia giapponesi zen 5 Raku pottery is created with a specific ceramic firing process that uses both fire and smoke to create unique patterns and designs. The piece is first bisque fired, then it is glazed and undergoes a raku firing process. The firing process requires a special raku kiln that is fueled by propane and reaches temperatures of about 1,800°F (about 982°C).corso-raku150

In order to complete the firing process, the pottery must remain in the kiln for approximately 30 minutes. It is then removed from the kiln using specially designed raku tongs. While the raku pottery piece is still hot and glowing, it is placed inside a metal can full of combustible materials. The heat emitted from the pottery causes these materials to catch on fire.

After the materials inside the metal can catch on fire, a lid is placed over the can and the pottery is sealed inside. The piece is capable of withstanding these high temperatures and the fire within the can because it is made from a special type of clay that is capable of withstanding thermal shock. Traditional pottery clays, on the other hand, would crack from the drastic temperature changes.

As the fire consumes the oxygen within the can, it also draws the oxygen out of the pottery and its glaze. This process is called post fire reduction. It this stage that creates the unique look of raku pottery. The resulting patterns and colors are unpredictable, as they are created through the naturalRaku River Totems process of oxygen removal.

After the raku pottery remains in the sealed metal can for about 15 minutes, it is removed and placed in a can of water. This freezes the patterns that were created during the post fire reduction stage. The amount of time a piece should remain in the cooling water largely depends on the piece and its size.DR1

Because the process of creating this pottery requires working with combustible materials and high temperatures, it is important for craftspeople to wear gloves, protective clothing, and eye protection at all times while creating a new piece.

Leave a comment

Make sure you enter the (*) required information where indicated. HTML code is not allowed.

User login